Time Series charts the live readings from the sensors on your twins. Add the twins you want, pick their sensors, and compare them over any period. Use it to check how equipment has been running, spot when something changed, and export the data.
Opening Time Series
- From the main menu. Select Time Series.
- From a twin or an insight. On the chart, select Go To Time Series. See The Time Series chart on twins and insights.
- From Twins search. Select Open In Time Series on a twin. Or, in the table view, tick the twins and select View In Time Series. They're added to what you already have.
Time Series keeps your twins, sensors and settings, so they're there the next time you open it.
Add twins and sensors
- Select Add Twin at the bottom of the Twins & Sensors panel. The search opens by itself when nothing is charted.
- Search for a twin, or narrow the list with Explore, Categories and Locations.
- Select Add.
To search for a sensor instead, select Sensors at the top of the search. Adding a sensor adds its twin with that sensor ticked.
The twin's main sensors are ticked for you. If the twin has a calendar and you can view events, Calendar Events is ticked too, under Activity.
Choose what's on the chart
In the Twins & Sensors panel:
- Tick or untick a sensor to show or hide it. Each sensor's line matches the colour next to it.
- Filter data points. Type part of a sensor's name to find it.
- Parts of a twin, such as a supply fan or a cooling coil, are listed under the twin with their own sensors.
- Hide All unticks every sensor and keeps the twins.
- Remove All removes every twin. Willow asks first.
- Select ⋮ on a twin to Go To Twin or Remove from view.
- Hover over a sensor and select the connection icon to see how it's connected, such as the protocol and device.
- Select |< to collapse the panel and give the chart more room.
Change the date range
- Select the date range at the top right of the chart.
- Choose a quick range, or pick start and end dates and times.
Quick ranges: Last 1 hour, Last 4 hours, Last 12 hours, Last 24 hours, Last 7 days, Last 30 days, Last 90 days, Today, Yesterday, This week and This month.
The first time you open Time Series, it shows the last 7 days. A range can be up to 371 days long.
To change the time zone, choose it under Timezone in the same picker.
Change the interval
The interval sets how far apart the points on the chart are, such as 15 Minutes or 1 Hour. Select the interval control (the line icon) next to the view and choose another.
The choices depend on the date range. Intervals longer than the range can't be chosen.
Choose a chart view
Select the view control (the layers icon) and choose:
| View | What it shows |
|---|---|
| Twin | One chart per twin. |
| Grouped | One chart per unit, such as °F or %, with on/off and multi-state sensors in their own charts. |
| Stacked | One chart per sensor. |
| Shared | All sensors on one chart. On/off sensors and calendar events show as bars above it. |
Zoom in on the chart
- Drag across the chart to zoom in on that period.
- Drag the handles on the bar under the chart header to zoom. Drag the middle of the bar to move along.
- Shift + scroll over the chart to zoom in and out. Once zoomed, drag to move along.
- Select Reset Zoom to go back to the full range.
Read the chart
Hover over the chart to see the values at that time.
- Readings show the value and unit. When a point covers several readings, you see the average, with the lowest and highest.
- On/off sensors show how much of the time they were on and off, such as True 35%, False 65%.
- No Data. A grey dashed line, and No Data in the tooltip, where no readings came in.
- Out of range. Readings outside the sensor's expected range are greyed out, with the limits shown as lines.
- Calendar events show as bars from start to end. Hover over one to see its name and times.
Save or export what's on the chart
To save your view as a favorite, share it, or download the data as a CSV file, see Save, share and export Time Series data.
Comments
Please sign in to leave a comment.